Spectra Precision HL450 Laserometer
The perfect complement to your laser.
The HL450 Laser Receiver features a digital readout of elevation that provides a numeric display of ± 40 mm or ±1.5 inches. The readout is displayed on the large front and rear LCD’s and shows exactly how far the elevation is from on-grade. Accurate measurements can be made without moving the rod clamp, saving time, and increasing productivity.
The patented anti-strobe filter eliminates false readings from LED lights that are commonly found on the job site such as vehicle hazard warning strobe lights. And with the digital readout models which have the prefix HL, you do not even need to get the receiver to the on-grade position because it displays how far from on-grade you are - allowing you to work faster and more accurately. You can quickly estimate how much material you need to cut or fill.
- Reliable Accuracy. All our models have different settings to suit your jobsite tolerances. The units of measure can be displayed in millimeters, centimeters, feet & inches and fractional inches.
- Reception Length. The longer the reception zone, the quicker you can acquire the laser beam allowing you to get your work done faster. When used in vertical, a longer pick up zone allows more control when doing tilt-up or curtain walling.
- Crazy Simple. The laser receivers all include a display on the front and back for easy visual indication of detector status and grade information. The display shows proportional arrows to help you find the on-grade position rapidly. An adjustable audible tone indicates high, low and level. All basic functions are a single press away. Set your accuracy and loudness levels and get to work.
- Operating Time. Equipped with 2 AA batteries, all the models deliver long operating time to keep you working on the jobsite.
Specifications:
- Working Radius: 1 m - 400 m (3 ft - 1300 ft) (Laser dependent)
- Laser Detection Height: 102 mm (4“)
- Numeric Readout Height: 76 mm (3“)
- Accuracy (Dead band):
- Fine 1.0 mm 0.05 in 1/16 in
- Medium 5.0 mm 0.20 in 1/4 in
- Calibration 0.1 mm 0.01 in 1/64 in
- Reception Angle: ± 45° minimum
- Detectable Spectrum: 610 nm ... 900 nm
- Beeper Volumes: Loud = 100+ dBA; Low = 65 dBA
- Power Supply: 2 x 1.5 Volt “AA” batteries
- Battery Life: 70+ hours
- Automatic Shut Off: 30 min
- Environmental: Waterproof, Dustproof to IP67
- Weight without clamp: 371 g (13.1 oz.)
- Dimensions without clamp: 168.0 x 76.0 x 36.0 mm (6.6” x 3.0” x 1.4”)
- Operating Temperature: -20°C...+60°C (-4°F...+140°F)
- Storage Temperature: -40°C...+70°C (-40°F...+158°F)
*Specifications subject to change without notice.
7S0059 HL450 Laserometer with Clamp and User Guide
Ships directly from Spectra